Remix of Ulticube

date: 24.09.2018

I very thanks to @ Geaz for wonderful easy design & to share his work.

I remixed it little bit as per my needs and considering the cost. The design completed today.

I will update the progress later on

Thank u to all.

Final Update

This is remix of Ulticube by Geaz https://www.thingiverse.com/thing:2905423

Print Area: 220x220x210 (X/Y/Z in mm)

Printer Size: 360x380x440 (X/Y/Z in mm)

Features:

Using a RAMPS 1.4 board running on Marlin 1.1.9

Used extrusions:

20x20 Aluminium Extrusions corner cubes (3d printed)

5x 340mm (X Axis) = 1700 mm

4x 320mm (Y Axis) = 1280 mm

4x 400mm (Z Axis) = 1600 mm

Bed Assembly

I used acrylic as of now (but sheet metal or aluminium I preferable)

Used materials:

10x GT2-Pulley-20-Tooth-8mm-Bore

2x GT2 Pulley 20 Tooth 5mm

8x Ball-Bearing-F688ZZ

2x 200mm GT2 6mm Closed Loops

1x a few meters (3 were enough) GT2 6mm Belt

6x 8mm Inner Diameter 12mm Outer Diameter 20mm length Sinter Bronze

2x LMF12UU bearings (Z Axis) (I also uploaded 3d printable one for LM12UU)

1x 300mm Length 8mm Diameter Rod

1x 320mmL 8mmD Rod

1x 360mmL 8mmD Rod

1x 400mmL 8mmD Rod

2x 380mmL 8mmD Rod

2x 340mmL 12mmD Rod

1x 250mm 8mm Lead screw

4x Neema 17 Motors

1x12V 20 A Power Supply

1xMK2 heat bed

1xHeat bed holder

1x LCD 128x64

1x Arduino Mega 1No

1x Ramps 1.4

3x Limit switch

1xE3D V6 Hotend with Heater and Teflon tube for remote extruder

1x Bowden extruder Assembly

4x Spring for Bed

1x 3 Pin power cable

3D printing

14x Corner bracket

4x Bearing (F688ZZ) Holder for x Axis

2x Bearing (F688ZZ) holder (Type A)

2x Bearing (F688ZZ) holder (Type B)

2x Limit switch Holder (for X & Y Axis)

1x Z Limit switch holder

Used Screws

Bunch of M5 8mm (I think I got around 150 pieces and this was enough)

Bunch of M3 8mm and 12mm (For the motor mounts and Z mounts)

Bunch of M3 & M2 nuts

16x M2 10mm (for the sliders)

2x M2 8mm (for the hotend)

2x M3 22mm (for the part cooler)

Category: 3D Printers