November 3, 2022
Description
The 25mm version did not fit my 25x25mm aluminum square tubing and the 25.4mm version was to loose. I saw a comment on the 25mm version with someone else having this same problem so I thought i would upload my fix for that.
This version adds a 0.25mm margin to all sides of the square tubing cut out. At least with my printer this results in a very good fit.
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3
Infill:
20
Filament: add:north PETG
Category: 3D Printer PartsLicense:
Creative Commons — Attribution — Noncommercial
7
Choffa
