Velcro loop fridge magnet (150x100mm)

What happens if you combine magnets, velcro and some 3d printed parts? A velcro loop panel for your fridge to put in all the velcro patches that are not attached to your gear.

CA glue works very well for glueing the velcro loop piece to the PLA, on the side of the magnets. This one uses 100mm / 4" velcro but you could also attach two strips of 50mm / 2" instead.

The models, one for 6x3mm magnets, one for 8x2.5mm magnets (the ones I had at home), others available on request). Magnets are a friction fit, there is 0.4mm of material between them and the fridge door. Cut out from the middle to make it a little lighter.