Phone Mount Ball Joint to goPro adhesive mounts - 17mm Ball joint

Short, new Version: https://www.printables.com/model/470834-phone-dashboard-mount-v2

17mm seems to be the default for many chargers using ball joints.

I recommend printing in a Material with a higher melting temperature to prevent deformation during warmer days. 

Depending on your climate you might want to support the mount by resting it on you dash as the adhesive eventually came loose with the additional leverage from slamming my phone into the mount on a hot day.

I used it for these phone mounts / chargers:

• First Charger
• The one in the image

The adhesive mounts.

(Please excuse the German links ;) )

For assembly you need:

• M3x22 or longer
• M6x20 or longer
• M4 Nut