2.5" x2 ssd drive bay for SuperMicro

I bought a SuperMicro 6028U-TRTP+ 2U server and needed to install a 2.5" ssd. This chassis has an option for a dual 2.5" internal bay, but mine didn't come with one. So I designed and printed my own.

I couldn't find a good place to buy a SuperMicro peripheral-SATA power cable, so I spliced together my own. I recommend buying one if you can.

I found that the hex grid was strongest oriented so it had flat bridges instead of vertical pillars, so print the drive bay so that it's standing up tall-ways.

Category: Electronics