November 6, 2022
Description
A remote tray i made to tidy up the TV table.
U May have to change the layout of the various cut outs for your remotes.
This is just a basic Model which worked for me but may has to be changed for your needs.
You have to put the Printsettings for the skirt of the printobject to 1 mm or less.
If you dont do that u will have an error because the object is just as big as the printbed allows.
When I was Printing the second layer failed due to printbed adhesion so I recommend applying glue in the first place instead of waiting 2 hours till the first layer finishes and then starting again.
License:
Creative Commons — Attribution — Noncommercial
Beryljam
