Apple TV 5th Gen Remote Holder for Under Table or Wall Mount

Overview

Hi everyone!

This is a simple model I made that allows the Apple TV 5th Gen remote to be mounted to a table, wall, or anywhere else you can think of! It has two countersunk m4 holes to allow it to be screwed to something. I personally use it with velcro command strips¹ and they have no issue holding it up.

Print Settings

This is a pretty easy part to print and doesn't need infill to be strong, I used:

• Layer height: 0.15-0.2 Quality
• Infill: 5% Gyroid
• Supports: None
• I printed this in Prusament Galaxy Black PLA¹

Model Files

Note: I make all of my models in Creo, Printables does not support the file type so I put all of my models in this GitHub Repo.

1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!