2018+ Crosstrek/Impreza Water Bottle Holder with F3D

If your water bottle is too big for your Subaru Crosstrek/Impreza's water bottle holder, look no further. This print sits in your water bottle holder and allows for a larger water bottle to fit in the cup holder. I specifically designed these for my two Yetis I have but they likely fit other bottles well and you can use the F3D file to modify the diameter.

Print Settings

• Layer Height: 0.20mm Quality
• Material: A heat resistant material like ASA is best, I recommend this ASA¹
• Infill 10-15% (mostly for thermal resistance)
• Color change at layer 34 to get the Subaru logo to be a different color.

How to Change the Model

• If you make one for your own water-bottle please post a remix for others!

Adding/Removing the Subaru Logo

• To remove the Subaru Logo, take the timeline bar and slide it to the left up onto this point.
• To remove the pocket the Subaru logo sits in, move the slider further over to this point.

1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!