V-Slot snap on cover Ender 3 - CR-10

UPDATE 2022/08! Added a quick test file so you can check what width size fits better for you! From 8.5mm to 8.9mm. Different calibrations config. of printers can make the cover from fit tight to be very loose so you can test it before print the final ones.

UPDATE 2021/02! Added a new profile V-Slotcover135mmV2.stl it will snap much more easy and secure to the V-slot than previous version. Enjoy!

Snap on cover for V-slots aluminium extrusions, no need to remove bolts and caps, just snap on!

It prints upside down, so if you have glass bed, you will archieve a mirror finish in the cover.

I made these to cover the rail beside the control module, so the length it´s 135mm, but you can stretch to any size, just make shure to scale in one direction only.

Added a photo of the same v-slot cover printed in clear petg to act as led diffuser and it´s great!!

Print Settings

Printer Brand:

Creality

Printer:

Supports:

No

Resolution:

Infill:

no

Category: 3D Printer Accessories