Small Straw, at angle, with thin walls

I needed a little straw with the end at an angle to reach into corners.

4.8mm diameter hole, 0.4mm wall thickness, 70mm long, is at 15 degrees (75 degrees from horizontal).

Print in vase mode - in Curaturn the "Spiralize Outer Contour" setting on.

I needed to use a raft.

I also printed at 50% speed though I might not have actually needed to.

Obviously PLA isn't food safe, so treat this as a one time use object if it's in contact with food or drink.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Yes

Supports:

Resolution:

0.2mm

Filament:

eSun PLA+

Black

Notes:

Category: Household