Thin Wall Transparent Float Bowl

Summary

This is a see-through float bowl for checking the fuel service levels on Mikuni BS34 carbs. It may fit other carburetors. If printed with a translucent/transparent filament it allows you to see the actual fuel level inside the carb.

You can learn more here:
https://www.youtube.com/watch?v=ELfIl_XMGPc

To see it in action, click here:
https://www.youtube.com/watch?v=p-krZYz0INA

This thin-wall design was leak proof without any sealers or post processing. If yours leaks you can try sealing the inside with Polycrylic water-based floor finish by Minwax.
Or use a two part epoxy or try any other kind of transparent sealer.

Please note: This design does not use screws to attach the float bowl to the carbs so you will need to either hold it in place by hand, or fix it with mechanics wire or gear ties.

Check my other design that uses screws:

https://www.printables.com/model/312027-transparent-float-bowl