Tormach Slant Pro 15L Lathe headstock funnel

I found occasionally when using the lathe that coolant would come out of the collet closer end of the headstock so I designed this little funnel to catch it and drain it back into the enclosure. You'll need some 1/4" ID hose and you'll need to drill a hole in the enclosure to pall the hose through. It mounts to an existing bolt on the machine.

Print Settings

Printer:

Folger Tech Prusa 2020

Rafts:

Supports:

No

Resolution:

Infill:

25%

Post-Printing

Tap the end holes in the bracket to 10-32 and drill out the holes in the bracket cap to 10-32 clearance size. Mount and run your tubing.

How I Designed This ===================

Designed in Inventor 2015

Category: Machine Tools