Simple Front License Plate for MK7.5 GTI

I wanted to design a front license plate mount for my 2019 Volkswagen GTI (MK7.5).

Required hardware: 

• 3x 6" zip ties 
• 2x M6 Brass Inserts (I used some from McMaster Carr)
• 2x M6 Stainless Steel bolts (I used security Torx from McMaster Carr)

Printing:

I printed this with ApolloX ASA in a non-heated enclosure. 

• 0.4 nozzle
• 0.2 layer height
• 30% infill 
• 5mm brim
• Model has built-in corner hold downs for best adhesion for warp-prone materials (e.g. ABS, ASA)