November 11, 2022
Description
Thought I would make some custom brackets for my case because my case has the kind that are push-out and I needed to fill some slots.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
50
Filament:
CC3D PLASilky Blue
Notes:
Use supports if you print flat because the part that inserts is 1mm whereas the rest is 2mm. This is to fit the point in place, but thick for the lettering to hold up.
License:
Creative Commons — Attribution — Noncommercial
Avel
