Paint Stand with Brush Holes

Hi y'all!

Here is a remix of ironhardt's paint holder (https://www.thingiverse.com/thing:3566632). I am new to 3D printing and modeling so I wanted to create a paint tray that could hold my brushes and paints, but I only have a few! So I took to thingiverse to find something to what I was looking for. I used ironhardt's design and came up with this.

First, I used Meshmixer to plane cut the model to only include the front holes. I then loaded the .stl into Fusion 360 and just added the holes at the top for the paintbrushes. The paintbrush set I have is just a basic one from Target. I measured with calipers the width of the thickest brush and used that number to sketch the circles in Fusion. I then used sweep to extrude the circles to the base of the model.

The circles for the paint measure 40.34mm/4.034cm. The holes for the paintbrush measure 6.35mm/.635cm.

In the picture, the shorter paints measures just about 40mm and the smaller white one measures about 33mm.

And voila! Here we are. My first remix!

If you have any questions let me know!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Infill:

10%

Filament:

eSun PLA

Blue