Another Plant Rooting Ball

Cut about 25mm/1in of the peel/bark of the branch you want to propagate. Fill each side with compost or potting soil. Encapsulate the branch and secure with zip ties. Add water to the top of the ball at regular intervals to prevent the soil from drying. Since the top should be loose around the branch, you may squeeze the top/bottom of the ball to open a gap on the side and monitor root development. Once there are a noticeable amount of roots, cut the branch and plant as preferred.

Print in the orientation shown and use a 6mm brim to provide extra build tack adhesion. 

Printed using PLA+ at 0.28mm resolution.