FLSun V400 PrusaSlicer Profile

This Projet is WORK IN PROGRESS

If you like this project, take a moment to buy me a virtual coffee … 

To install the texture and printer silhoutte in PrusaSlicer, go to:

Settings → Printer Settings → General → Bed shape → “Set…”

Load the SVG file (V400.svg) as the texture,
Load the STL file (V400_bed.stl) as the Model.

Then Save the Profile Modified.

To know more about custom SVG and PNG bed textures, have a look at the Prusa knowledge base: https://help.prusa3d.com/article/custom-svg-and-png-bed-textures_124612

Pritables group link: 

https://www.printables.com/it/group/fl-sun-v400-italia-oQJxNoR/comments

Starter G-code:

;STARTGCODE
M117 Initializing
; Set coordinate modes
G90 ; use absolute coordinates
M83 ; extruder relative mode
; Reset speed and extrusion rates
M200 D0 ; disable volumetric E
M220 S100 ; reset speed
; Set initial warmup temps
M117 Nozzle preheat
M104 S100 ; preheat extruder to no ooze temp
M140 S[first_layer_bed_temperature] ; set bed temp
M190 S[first_layer_bed_temperature] ; wait for bed final temp
M300 S40 P10 ; Bip
; Home
M117 Homing
G28 ; home all with default mesh bed level
; For ABL users put G29 for a leveling request
; Final warmup routine
M117 Final warmup
M104 S[first_layer_temperature] ; set extruder final temp
M109 S[first_layer_temperature] ; wait for extruder final temp
M190 S[first_layer_bed_temperature] ; wait for bed final temp
M300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle
M300 S0 P250       ; wait between dual beep
M300 S440 P200     ; 2nd beep for printer ready
G4 S10             ; wait to clean the nozzle
M300 S440 P200     ; 3rd beep for ready to start printing
; Prime line routine
M117 Printing prime line
;M900 K0; Disable Linear Advance (Marlin) for prime line
G92 E0.0; reset extrusion distance
G1 F3000 Z1
G1 X-150 Y0 Z0.4
G92 E0
G3 X0 Y-130 I150 Z0.3 E30 F2000
G92 E0.0 ; reset extrusion distance
; Final print adjustments
M117 Preparing to print
;M82 ; extruder absolute mode
M221 S{if layer_height<0.075}100{else}95{endif}
M300 S40 P10 ; chirp
M117 Print [input_filename]; Display: Printing started...

Final G-code

; printing object ENDGCODE
G92 E0.0 ; prepare to retract
G1 E-6 F3000; retract to avoid stringing
; Anti-stringing end wiggle
{if layer_z < max_print_height}G1 Z{min(layer_z+100, max_print_height)}{endif} F4000 ; Move print head up
G1 X0 Y120 F3000 ; present print
; Reset print setting overrides
G92 E0
M200 D0 ; disable volumetric e
M220 S100 ; reset speed factor to 100%
M221 S100 ; reset extruder factor to 100%
;M900 K0 ; reset linear acceleration(Marlin)
; Shut down printer
G28;
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
M18 S180 ;disable motors after 180s
M300 S40 P10 ; Bip
M117 Print finish.

Before Layer Change G-code

;BEFORE_LAYER_CHANGE
G92 E0.0
;[layer_z]
 

After Layer Change G-code

;AFTER_LAYER_CHANGE
;[layer_z]

Follow us and contact us for other requests: