April 23, 2023
Description
I created a bigger and reversed einsy case for better cable management and airflow
Fits on
To assemble everything you need:
| # | Fasteners | |
|---|---|---|
| 1 | Insert the zip tie for the heatbed cable before you assemble everything! | 1x zip tie |
| 2 | Insert the M3 nuts on the backside of the case to attach the einsyboard | 4x M3 nuts |
| 3 | Attach the Einsyboard with the screws to the case | 4x M3x10 screws |
| 4 | Mount the case to the aluminium frame of the printer | 4x M3x8 screws |
| 5 | Insert the heatbed cable bundle including the textile sleeve in the case | |
| 6 | Plug in the heatbed cables to the board and tighten the zip tie | |
| 7 | Connect the extruder cable bundle and the PSU cables to the board | |
| 8 | Mount the extrudercable cover part 1 to the case | 2x M3 square nuts |
| 9 | Connect the X-Axis cable to the einsyboard | |
| 10 | Mount the extrudercable cover part 2 to the case | 2x M3x23 screws |
| 11 | Attach the cover to the case | 4x M3x10 countersunk screws |
PSU and heatbed power cable connection
https://help.prusa3d.com/en/guide/8-electronics-assembly_174100#175093
FAN connection (optional)
Select "Supports from build plate only", no additional supports needed.
20.04.2023
New revision with a lot of updates.
To use this you have to print everything again.
Parts are NOT interchangable to the old revision!
30.10.2022
Adjusted the thickness of the “einsycase_cable_cover_2” part.
Instead of 23mm long screws you can now use 25mm long screws.
30.04.2021
The screwable cover has now two holes for the extruder and x-axis motor cable.
To assemble you need two M3x23 screws
02.12.2020
Much easier assembling of the extruder cables
with the screwable cable cover
30.10.2020
Additional cover for 40x40 fans
20.06.2020
New cover
18.06.2020
Slightly bigger hole for extruder cables
Two more air vents
15.06.2020
Case Cover: Hole for x-axis cable higher
Einsy Case: Improved holes for square nuts
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Boogie
