📖 Openable hideout book + remotes holder (parametric)

Info:

• well, I have jumped into the “remote holders contest” (for hiding them in a convenient way) too late, but I finished this model (and printed 😀) just on time
• design is parametric (see source file), so any book width/height is possible (with some minimal values)
• with a possibility of insertable remotes holding stand for another level of convenient usage (in a design of cover ornaments)

Parts:

1. print in place book cover with hinge
2. faked pages box
3. optionally also insertable cage for holding a remote

Print instructions:

• cover:
  • this is quite a stress test for your printing plate, as you can have the book cover all over the plate
  • be sure to have:
    • 🧹 perfectly clean plate + perfect adhesion + perfect 1st layer (the front cover page is printed on the bed)
  • bridging angle: 45° (because ornaments on the cover are made from bridges and having 0° or 90° will fail)
  • hinge works fine for 0.4mm nozzle and 0.2mm layers
• insertable remotes holder:
  • recommending PETG or something flexible

Parametric model info:

• source file is in Blender, open it, between objects, click “COVER-TOP-PROPS” and open properties (or hit “N”)
  • “book width”  - simply input book width in cm
  • “count” property - number of connectors in the hinge (so this is a book height)