2 Inch Monitor Shelf Riser for 0.8 Inch Desk Legs

I modeled this to raise the monitor stand on my Ironck (cheap brand on amazon) desk, but it should fit any desk pieces with square leg of 0.8" (~20mm). The height of the lift is just over 2 inches (~55mm). 

My desk had existing holes to screw the monitor stand down, so I modeled a peg onto the bottom of the riser to fit into these holes (0.3" (~7.5mm)). If your desk does not have holes, you might be able to drill some, which had the added benefit of not letting the monitor stand move around.

I had the best luck printing upright on the peg, with supports and brim turned on for greater surface area/adhesion.