Xbox One Controller Bumpers

This was remixed from RaffoSan's original & pbpunk's (From Thingiverse) Designs to create a more ascetically pleasing bumper set. I have 2 versions, A single-piece drop-in setup, and a 2 piece left & right. This may require more finesse to install but would save filament in the long run if you have already had to install several new bumpers through the years. I had to edit the spacing on bumpers from the mount. hence the {-2} On the single piece I had to cut directly in the middle and separate them. But it works..

PLA is Ideal but ABS can work, it just might take a few tries.

Printing:

8MM brim

0.2mm support Z distance for support removal

Support placement only touching build plate

I would sand and smooth for paint for the best grip. Also I Will be testing adding super glue to the middle part to add extra strength. (Allow super glue to dry before install) (Please allow to cool, the middle part can be very fragile.)

Thank you RaffoSan & pbpunk for your hard work.

I will be refining the bumpers soon and making a new submission with revised files.

Print Settings

Printer:

Anet A8

Rafts:

Yes

Supports:

Yes

Resolution:

.2 MM

Infill:

100

Filament:

Sunlu PLA or ABS

Red

Category: Video Games