November 13, 2022
Description
Spool Adapter 72mm for Anycubic Kobra, replace original adapter spool!
I'ts designed for Filament Spool SUNLU and similar with hole 72mm.
Printable without support*.
Printing at 0.2mm with 20 or more fill for better strength.
I used Orange PETG.
The nut thread is in the reverse direction.
*Attention how to print, for me Support unnecessary with PETG, but it depends on the filament and printer setting.
Pay attention to the tolerances for the holes.
Add 2°Version with reduced length 65mm internal space to spool.
License:
Creative Commons — Attribution
7
3DPrintDesigns.it
