November 13, 2022
Description
Tamiya Mercedes C11 Mirrors. 2 Piece with no supports needed. Print vertically and I used a 0.2mm nozzle with 0.1mm layer height for best finish with zero infill. See picture for how to assemble them with superglue and I also used superglue to attached them to the body. I used a piece of PPF as interface between the body and the mirror because I didn't want to supper glue directly to the body. You can use very clear tape or something similar. Enjoy.
Depending on your printer you may have issue with the mounts and how it will assemble with mirror. The mirror prints really easy but the mounts are really small so it might be a challenge for some FDM printers.
License:
Creative Commons — Attribution
9
juanmedinar20
