1 & 2 Spool wall mount

I wasn't quite happy with the existing options, so I designed my own spool mounts.

The single holder is pretty straight forward:

• 3 Wall layers
• Infill 20% (Gyroid or cubic)

For the double spool mount there are added internal supports in the form of intentional internal walls to force the slicer the generate solid walls all the way down to the bottom layers for increased strength.

Print settings: If you're using Cura, just open the 3mf file as Cura project. All values are already set there for PLA

Important: Support settings

• Gyroid (or cubic) pattern
• 20+% support infill
• 0 Z, X&Y distance
• 0 Support Stair Step Height
• 0 Support Join Distance
• No support interface

Wall line count: I'm using 4 but 3 might also be sufficient