Logitech K270 Keyboard foot

Quick little replacement foot for the Logitech K270 keybaord.

These are for the feet at the front, not the feet at the back. They're bigger!

I would suggest that if you lost one of the feet on the corners, replace that with the foot from the middle and then print a replaceement for the middle as TPU is not as good at gripping desks!

I glued mine in with hot glue as my glue gun was within easy reach!

NB: This is a stupid quick print. On my default TPU settings, it was 3 minutes. So you could stand to slow down the print to make surface finish a little better.