Magnetic or not Xbox Controller Stand/mount

UPDATE FOR DESK VERSION!

I've made a new version for whose won't use the magnetic feature, now it's a lot more stable, however, you can print it without supports only on the side!

The original design is not mine, I have made a new remix with the stand suitable for both magnetic and on planar surfaces (eg: ur desk), I have added a lip so the controllers can be more stable . Also, I've cleaned the file from some artifacts. Now, it is possible to print it directly with the "X" logo directly on the bed plate, if you have a less performing printer I suggest you print it on a side for a better chance of success.

I used 15x magnets (5 x 1.5 mm). If you have bigger magnets i think you won't need as much.

____________

Printed in PETG with 3 perimeters and 5% infill

0.20 layer height

since there are a lot of magnets sizes available if you have different magnets just tell me in the comments i will upload a custom version!