🚪 Parametric hinge - horizontally printed - print-in-place

Info:

• any width/height 
• any number of holes
• hinge is adjusted to extra negative opening angle -105° (which means it opens in total to 105+180 = 285°)
• the plate is 3mm thick
• i needed parametric horizontally printed hinge for my previous model, so here i have separated it with even more possibilities and formulas, that can be useful

Variations:

• exported few most common variations
• see Blender file for other params

Print info:

• increased infill, if you want more durability (50%)

Parametric design:

• connectors_count
  • the height of hinge 
  • number of connectors on the right side of the hinge
  • height in cm is always connectors_count-0.5 (so for 5connectors, it will be height 4.5)
• side_width
  • width of one side of the hinge in cm
• holes_x
  • number of holes in the width direction
• holes_y
  • number of holes in the height direction