November 15, 2022
Description
UPDATED TO V2
Or version 10 for me, because i made A LOT of modifications.
This one wont collide with your fans or affect the leveling of the 3D printer! And i made most of it from scratch, so it is a lot easier to update it in the future.
Just a simple cable cover for the duct i made. It wont collide with the blowers and with the strain gauge (i made 4 versions before uploading this) and there is enought space for the cables of the blowers and the 4020 fan.
And it looks super cool with it
Printer:
Creality CR6 SE
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50%
Filament:
GST3D PLABlack
Notes:
i used 100% infill for this one, but just use 50%. You will achieve the same results if using 3 walls (this thing is thin).
USE NORMAL SUPPORTS WITH A SUPPORT INTERFACE DENSITY OF AROUND 90% FOR THE BEST RESULTS (trust me, tree supports didnt work well with this thing).Just use something sharp for separating the support of the part
License:
Creative Commons — Attribution — Share Alike
7
Persano
