PRUSABOX multiholder 1 and 2kg spools

The multiholder can be used as 5 spools holder either 5 1kg spools or 1pc 2kg and 4pc of 1kg spools or, can be modified (by printing a few diferent parts) to hold 2 kg spools and 3 5kg spools and yet it still fits the roof of Prusa box and leaves 1cm on both sides for glasses. I suppose to close the holder into dry box... For mounting you will need to cut spool center axes -use 8mm thick aluminium or iron tube, and some 3,5mm screws. The holder can be placed on wall either. For the filament guides use silicone tube 4/3 (not those 4/2. The 4/3 works better.

Print instructions

For my favourite colour variation please print the files in black and orange. The orange parts are in files named "orange". Print each gcode once - only the orange spool stand 1kg print 4x. If you want to have 2pcs of 2 kg spools, you must modify the spools file and print two long and three short instead of three long and one short and of course, you have to print two 2kg spool stands aond only 3 the 1kg spool stands. The amount and type of axe holders depends on how you place the 2kg spools. Whether next to each other, or somehow like that. For further info please leave me a message and I will make the 3mf file just for you - if needed.