MODULAR DESK ORGANIZER / PHONE HOLDER

This phone holder is part of a desk organization set. This being only one component of the complete set.
For the complete set please visit: https://cults3d.com/en/3d-model/home/modular-desk-organizer-levytek

Update:
18.10.2022 - I changed the design of the pen holder a little bit; I added a frame + it became as high as the other modules. Search among images for a picture with (old, new).

The full package includes:
- phone holder 10x10x1.5cm (works with iphone pro max with the magnetic apple wallet attached).
- a 10x10x20cm box
- a 10x10x20cm organizer
- a 20x10x1.5cm box
- a pencil holder 20x10x1.5cm (up to 5 pencils)
- a support for post it 10x10x1.5cm

PS.
- the complete package includes the STEP files, so you can change the shape or add some text.

There are two variants:
- with magnet (there is a hole with a diameter of 10.2mm and a depth of 5.2mm on each side of the modules)
- without magnet (it has no hole)

The magnetic version requires 27 magnets with the size of 10x5mm and a small tube of glue, for the whole set.

I recommend placing the magnets in the following way:
- left and bottom same polarity
- top and right the same polarity (opposite to left and bottom)

IMPORTANT NOTE:

If you want to sell 3D prints based on my designs legally, please become a Patreon on my page and get early access to all the new designs:
www.patreon.com/levytek

All of my Designs are covered by a Creative Commons Non-Commercial License. The sale of prints using my designs is the sole right of myself, the designer, and my active Patreons to do so. Please understand that every design is workday, and multiple prototype prints to ensure quality.

THX!

3D PRINTING SETTINGS

Resolution:
0.3mm
Infill:
5-15%
Walls:
2
Line Width:
0.65mm
Material:
PLA Matte