November 17, 2022
Description
This mounting reduces time for the upgrade, keeps the D1 board in place and ensures an adequate airflow to the sensor.
Just print the mounting (PLA, 0,2mm layers and 23% infill will do just fine) and fix the ESP-Board with two 2 x 5 mm screws.
The mountig fits the upper side of the housing and is kept in place by the two screw pipes.
The instructions for the IOT upgade have been published by the german version of the MAKE-Magazine:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
db3jhf
