RaspberryPi 3B Case with 30/40mm Fan- Prusa Mk3 Mount

This is a case to hold the RaspberryPi 3B+ along with a 30mm or 40mm fan, and can be mounted to the Prusa Mk3 frame, or can just sit somewhere.

It has been designed to accommodate the Noctua 40x40mm fan (which is silent compared to other 5v fans), but can take any 40mm or 30mm fan that thickness or smaller.

Fitting

• Fit the fan to the case (making sure your airflow direction is correct)
  M3 screws for 30mm fans and M4 screws for 40mm fans
• Fit the big part of the case to the printer frame (using 2x M3 screws)
  There is a passthrough opposite the screw port inside the case to allow you to feed a screwdriver through the case whilst fitting.
• Place the Pi in the case and screw it, and the small part of the case closed

I hope you enjoy printing and using my design. To help me keep designing and uploading more things, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood