Cable Management Grommet for IKEA Lack Enclosure (1/2 inch hole)

I was adding LED lighting to my IKEA Lack Enclosure and wanted a clean way to pass the cable outside the enclosure. I created this cable management grommet for this purpose. The grommet will fit into a 1/2 inch hole in the enclosure and the grommet cap will allow a cable up to about 3.5 mm in diameter.

Print instructions

These are the settings I used for my prints.

Resolution: 0.20mm Quality
Material: PETG
Supports: None
Infill: 15%
Brim: None