baofeng UV-5R dust cover

Baofeng uv-5r dust cover for mic/headphone plug

SUPPORTS:

i used PLA as a support, since (afaik) pla and tpu don't stick well to each-other.

used PrusaSlicer with multiple extruders config.

pla as support config:  (pla is extruder 2)

To enable multiple extruders on single extruder printer in PrusaSlicer :

Printers>General>Capabilities:

  - increase extruder above  1

  - enable “Single extruder MM”

Printers>Custom G-code:

  - Tool change G-code = M600

z offset of 0.2 and 0 both worked good and were easy to separate

Filement: TPU (creozone)

Layer hight: 0.2

Printer: Prusa mini

Nozzle: 0.4