February 1, 2023
Description
Cable clip that clips onto the corner of the extrusion instead of inside the channel. I like to slide sheets of carboard in the channels of my printer as a poor mans enclosure (works great), and the normal cable clips get in the way as they occupy the channel.
Printer:
Flying Bear P902
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
NA
Filament:
Overture ABSBlack
Notes:
Can be made of PLA, ABS or PETG etc., even flexibles may work. 0.1-0.2mm layer height recommended.
License:
Creative Commons — Attribution
7
hi_im_sean
