SQ-ES126 Electric Screwdriver Case

Preparation:
The Case reuses the Bar Magnets that come in the Bit Storage Case requiring for them to be retrieved first ( most likely cleaning by removing any glue and case material still sticking to them ).

The Cavities account for Magnets the size of 39x6x4.5mm OR smaller ( in case they've changed them so check beforehand! ).

You'll have to insert a PAUSE command at the correct height to actually insert these Magnets - The Cavities will be close at 5.2mm so inserting the PAUSE at that height should be the proper height.

CAUTION: I HIGHLY advise the use of viscose Super Glue to secure the Magnets into the cavities as otherwise they may be attracted to potentially attractive parts like Steel Nozzles, Screws or Probes in the Tool Head as it crosses over them.

Of Note:
This Version is now a Print in Place as it omits the use of a Filament for the Hinge and as such the parts should - once imported - not be moved around separately ( It should import as one part with 5 sub-Parts so just don't separate them ).

The Lid of the Case has my Logo ( 3 of the 5 Parts ) in it for use with MultiMaterial ( MMU2S / ERCF ) capable 3D Printers. If you do not care for it simply change their colors to be identical with the rest of the print 😥

B.O.M.:
4x 8x5x3mm Bar Magnets for keeping the Case closed - These can be inserted into the 0.2mm oversized Cavities once the Print has finished.