November 18, 2022
Description
Do you need to charge your giant iPhone, like the one in my profile? I've got you covered.
Giant. Lightning. Plug.
Continuing my tradition of printing #BigTech, I give you the Apple Lightning charging plug. This is meant to be printed very large, to act as a scale model or display. It is not designed with functionality in mind, though someone far more clever than I could probably make it work for something.
I've included a pre-sized up version of the stl, bringing the model to roughly 700%, while other parts are scaled slightly smaller/slimmer so they should fit together decently.
Glue is required to get the pins to stay in place, unless you just have really incredible tolerance skills.
Printing instructions:
Infill: 20% - 40%
Layer Height: 0.2mm or smaller
No supports for anything
The metal housing at the top contains some very fragile bridges, I recommend printing this in either PLA+ or something more durable like PETG.
This is a modified version of the model originally uploaded by Mark over on GrabCAD. Parts have been split and adjusted slightly for a better print.
License:
Creative Commons — Attribution — Noncommercial
Taptic Digital
