Anycubic Vyper / Kobra Filament Guide

After top mounting my filament on the Anycubic Vyper, I noticed it would catch and snap back on the corner of the Z axis bar. I designed a guide to top mount between the two top screws using a 3mm x 10mm screw using DaVinnci2000s nut to lock into the track: https://www.thingiverse.com/thing:3050607

Will work on Vyper, Kobra 1 and 2 series printers

Printed on Anycubic Vyper

Print Settings

Printer Brand:

Anycubic

Printer: 

Anycubic Vyper

Rafts:

No

Supports: 

No

Infill:

50%

Filament:

eSun PLA+ 

White

Notes:

Temps:
first layer: 205C

All other: 195C

Bed: 60C

Speed 70mm on perimeter

Layer Height: 3mm

0.4mm nozzle

50% infill is probably overkill.

Print time was 46 min

Category: 3D Printer Accessories