Replacement lid for rectangular 500g coffee tin (Finnish)

This is a replacement lid for a rectangular 500g coffee container tin that's commonly available at least in Finland.

I'm not sure how standardized these containers are or if some of them may have small differences in dimensions or the clip mechanism, so this may not work with all similar style containers. The one I have, that this was designed for, is from 1997. I'm pretty sure the ones you can still find in stores are fairly similar, but I haven't tested if my lid fits on those (please let me know if it works for the new ones or not).

You need the original metal wire/clip thingy and the rubber gasket from the original lid. You could easily design and print the gasket from TPU or some other flexible filament too, but I didn't have a need to print it as I could just use the original so I only designed the lid as my original lid had broken from the end where it closes with the clip.

Print instructions

No supports needed. This design includes one small built-in support piece which should snap off easily after printing.

I have only printed this from Fillamentum CPE HG100 which is a modified PETG. However for convenience I also sliced this with my PLA settings so there are 3MF and GCODE files both for both CPE and PLA settings. The GCODE for CPE is in the user print files section.