THANKSGIVING TURKEY LIGHT BOX

This is a light box turkey for thanksgiving that can be used for decoration.

BE AWARE!! you can only use LED strips that are 8mm wide (0,31496063 inch) the LED strip should be placed above the protruding edge.

you can print it with a layer height of 0.2 or 0.3 Print the front turkey with enough bottom or top layers so that there is no infill required. You should use 10-15% infill for the box. The white back is 0.4mm thick so it’s recommended for printing it with a 0.2 layer height. 
 

If you made it I would love to see how it looks! XD 
 

ASSEMBLY: 

It’s better for using led strips with a flexible wire between the power supply and the led strip itself because it’s much easier for installing the led strip in the box. The white back is glued in the front turkey. This (white back and turkey assembly) can be glued on the box as a lit.

It fits on a bed size of 220x220mm or you can scale it for bigger bed sizes