Jake the Dog Keychain - Poor Man's MMU's

Jake the Dog color print without MMU.

Print instructions

Print instruction if you choose my gcode.:

Layer height: 0.1mm
Make sure that before each color, clean the bed and nozzle, and color changes extrude twice.
I pull up little the filament manual, when start bed leveling, so no small pieces of plastic are placed on the bed.

When you are done printing a color, do not take it off the bed, just start the next one.
Don't worry about bed leveling, pinda, and nozzle will not get stuck in the model.

First color: Yellow

Second color: White

Third color: Black (Body) after the 3. layer replace with yellow.(simple m600)