Z Axis leveling tool (compatible Ender 3/sovol) | "Tombstone"

       Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.

                      https://www.youtube.com/channel/UCBjyI1E1HROh1BAYgeRZy7g 

         Support my work: (click on image)

                                            https://www.buymeacoffee.com/savagelau

         You can get commercial license from here:  (click on image)

                                                  https://www.patreon.com/SavageLau

______________________________________________________________________________________________________________

Update: V5.1 - 1/1/22

Extended the top part more, adjust the fillet angle. 

Update: V5 - 11/28/22

Extended the top part, able to hold against gantry better.

Update: V4 - 11/19/22

1. Fix unstable issue
2. Leg will able to fit in to the slot
3. Better style :)

________________________________________________________________________________________________________________
 

Chatterbox:

It looks like a tombstone on V4, so lets call it “Tombstone”. 

As shown on the pic, this tool is use for calibration for z axis. I think it will compared with most FDM 3D printers. At least, in my case it works with ender 3/sovol/BIQU/Anycubic.

Place it on the location as shown on the pic and lower the z axis, make adjustment on the z axis. This will find the better left and right z axis leveling.

Instruction video available on Youtube, check above. 

If you have any question, leave it on comment section.

Print Settings

0.2mm layer height should be fine. 

20% infill.