2x Laptop or mobile phone repair screw sorting trays

Updated! 7x5 tray added

These are two screw trays for use when dismantling laptops or mobile phones.

The idea is that the screw you remove goes in the tray in a similar position to the place the screw was removed from, for example on the bottom of a laptop, the top left screw would go in the top left corner recess, the bottom middle screw in the bottom middle recess and so on.

If required, you can glue a small magnet to the underside of each recess.

This should help when reassembling the laptop as it should jog your memory.

No supports or rafts are required if printed in the supplied orientation.

And no they cannot be used to bake small cakes..............

Print Settings

Printer:

Hictop 3DP-11

Rafts:

Supports:

No

Resolution:

Infill:

10

Category: Tool Holders & Boxes