November 21, 2022
Description
I designed this thing to replace the keys on my Vevor brand steel enclosure with knobs. Since my enclosure is in my garage, the keys were very inconvenient. These knobs press fit into the barrel of the keyed latches. So the knobs are always there to open/close the door. The knobs are knurled, and have a line marking so you can tell with a glance if the door latch is locked or open.
No supports are required to print. Most materials should work OK. I printed in ABS, and press fitted the knobs on with a clamp.
Category: DIYLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
9
truglodite
