MPCNC Primo J Tool Mount (Burly remix)

Not that there is anything wrong with drilling the holes out on a Burly tool mount, but that just didn't sound optimal to me. So I remixed it for all to enjoy. The original stl file I used is the MPCNC Burly J 6-32 tool mount:

https://www.thingiverse.com/thing:1671517/files

Since that stl file was non-manifold, first I had to re-mesh it in F360 (aka "water sealing"). Then I punched out the pipe bolt holes for M5 clearance, and upped the counterbores to 9mm diameter to fit the M5x30 allen bolts I use. Ironically, despite a 'keep sharp edges' remesh operation and mesh boolean, the stl file size actually shrunk!

Print Settings

Rafts:

No

Supports:

Resolution:

.0001

Infill:

Filament: wan hung lo na magenta

Category: Machine Tools