2" ABS Pipe Surface Mount

I made this thing to secure some 2" ABS pipe to the side of my mpcnc table (the pipe serves as a vacuum hardline). They look much better than the plastic utility strapping I was using before (the kind used in building construction to secure abs or pvc to blocking etc), and hold the pipe much more securely. The mounts can be used wherever you want to secure some 2" ABS pipe to a surface.

Each mount requires one M3x20 bolt, one M3 nut, and a pair of #8 or similar sized flathead screws. Insert the nut all the way down into the slot, secure to a surface with two screws, insert the pipe, then insert and tighten the M3 bolt until the pipe is snug.

Print Settings

Rafts:

No

Supports:

Category: DIY