AA Stackable Battery Holders (wall mountable)

I redesigned the original model to add double height and reduced the text indents for adding the colored text as a color change instead of printing separately and gluing on.

I added the 3mf files with the settings I found best for printing them in PrusaSlicer (not sure if it works in other slicers). If using your own settings or a different slicer, the color change for the cover should start at 0.2 mm (optionally another at 1.0 mm) and the only supports were painted on the overhangs of the AA_Base.

All of mine were printed in PETG, but I'd assume it would work fine in most other filaments too.

Printing Tips:

• For the covers with a color change, it is better to have the first layer be a dark color and then doing a light color for the text. When I tried to do a light color for the first layer, you could see the darker layers behind it where the text was.
• This is a good model to use a 0.6 nozzle if you have one
• You may want to bump up the infill on the base parts

Please post some of your makes and any cool color combinations!