Keystone Jack Mounting for DIN rail

VER.2 of this design is a step forward. It improves mount's stability, rigidity and it does not break when inserting and removing from the DIN rail.  

_________________________________________________________________________________________________________

This single print Keystone mount is perfect for patching your ethernet connections. 

I highly advise to print it with PETG filament which is flexible enough to easily click it to DIN rail. Shape of the mount is designed in a way to bend a little when being fixed to the DIN rail.

Print the mount on its side and apply a support as shown in attached picture

Print it with PETG _ 0.2mm 

1. click keystone jack into the mount
2. Insert cover 
3. click the mount on the DIN rail by pushing its back side hard
4. when removing the mount, use a little hole in the back of the mount. Insert screw driver in mentioned hole and use is as a lever to release the mount.