SeaDoo ST3 Fishpro Second Battery Mount

This holder has been designed to be glued into the hull of the fishpro.

(The photos here are of a larger Lithium battery on my first version of the battery holder.)

I have designed the holder to have a large surface area touching the hull for maximum adhesion. 

Features:

Allowance for straps - ( i use larger Cable ties )
Low center of gravity.
Drain Holes.
Easy install – ( I recommend scrubbing the inside of the hull with a warm dishwashing solution and a scrubbing brush. Dry well them i used ISOPROPYL ALCOHOL to make sure there was no residue.  Then i covered the whole underside of the printed surface with a High-performance MS sealant adhesive.. Push into place and try to force the glue to squeeze out from the perimeter of the holder. I left mine for a few days for the glue to cure.)

https://www.motobatt.us/MBTX20U

http://www.anchorman.nz