circular beer bottle carrier + opener

I had some issues while printing this. Also got the input from a friend that a bottle opener attached to it would be nice. So I remixed it for a slightly better printability and added a standard bottle opener to the design. You have to press in an euro 2¢ coin. Use a lever to get it in, fits very tight. Everything else is perfectly described by the designer of the original design, there is nothing more to add.

Print instructions

I used the textured steelplate for the i3 MK3S and added magigoo as adhesive. Prints perfect without warping. The gcode file is based on the print instructions of the original design but adapted to the 0,4mm nozzle and Prusament PETG.

0,3 mm layer height

3 perimeters

4 top solid layers

4 bottom solid layers

20% honeycomb infill

</ul>
No infill in the clamps, for flexibility!